Skip to main content

HTTP Status Code Checker: See Every Redirect, Hop by Hop

An HTTP status code checker shows what a server answers when someone asks for a URL. Type in a page address and you see each redirect step, the status code at each one and where the chain ends.

Enter a URL to see its redirect chain

HTTP status codes, 301 and 302 redirects, loops, 404 errors

This matters for local SEO more than most owners expect. After a site move, a new service page or a city page rename, one wrong redirect can send both visitors and Google to a dead page.

The checker follows up to 10 hops and works on any public URL.

How to use the HTTP status code checker

Quick answer

Enter the full URL, including https://, and press Check redirects. The tool requests the page and follows each redirect, listing every step with its status code. Read the list from top to bottom: the last row is the page a visitor actually lands on.

Check the old address, not the new one. If you moved a page from /plumbing to /services/plumbing, test /plumbing and confirm it ends on the new page with a single permanent redirect.

The tool allows 10 checks per minute. If you hit the limit, wait a minute and run the rest.

What each status code means

Quick answer

A 200 means the page loads. A 301 or 308 is a permanent redirect, and 302, 303 and 307 are temporary redirects. A 404 means not found, 410 means gone for good, and any 5xx code is a server error. Use permanent redirects for pages that moved for good.

Google treats permanent redirects as a strong signal that the new URL should replace the old one in its results. Temporary redirects tell it the original may come back.

CodeMeaningTypical use
200OKNormal page
301 / 308Permanent redirectPage moved for good
302 / 303 / 307Temporary redirectShort-term move, A/B test
404Not foundDeleted page with no redirect
410GonePage removed on purpose
500 / 503Server errorHosting or code problem

301 vs 302 redirects for local pages

Quick answer

Use a 301 when a page has moved permanently, such as renaming a service page or switching a city page URL. Use a 302 only when the move is temporary, like sending visitors to a seasonal offer. Mixing them up is one of the most common technical mistakes on small business sites.

A common case: a plumber's site builder wraps every redirect as a 302 by default. The old URL keeps showing in search results for months because Google keeps expecting the original page to return.

Find and fix redirect chains

Quick answer

A redirect chain happens when URL A redirects to B, which redirects to C. Each extra hop slows the page and wastes crawler effort. Point A straight at C. The checker shows every hop, so you can spot chains of two or more redirects at a glance.

Chains usually pile up after several redesigns: http to https, then non-www to www, then an old page to a new page. Fix them by updating the first redirect rule to send people to the final address.

Google's documentation says Googlebot follows up to 10 redirect hops, but a shorter path is faster for every visitor.

  • Update old redirect rules to point straight at the final URL
  • Update internal links so they do not use redirected URLs at all
  • Re-check the chain after each change

What to do when the result is a 404 or a 5xx

Quick answer

A 404 at the end of a chain means the redirect points to a page that no longer exists, so fix the target or restore the page. A 5xx means the server failed, so check your hosting or ask your developer. Re-run the checker after each fix to confirm.

For a deleted page with a close replacement, redirect it to that replacement. For a page with no relevant replacement, a plain 404 or 410 is fine. Redirecting everything to the home page confuses visitors.

Check redirects after a site move or redesign

Quick answer

After any move, test your top pages: the home page, every service page, every location page and any page with backlinks. Each old address should end on the right new page with a single permanent redirect.

Make a list of the old URLs before the move and test them one by one afterwards. Use Google Search Console to find the pages that matter most.

Fix any old address that ends in a 404, loops or lands on the home page when a closer page exists.

HTTPS and www redirects

Quick answer

Your site should load at one preferred address only. The http version and the other of www or non-www should redirect permanently to it.

Test all four variants: http with and without www, https with and without www. Three of them should end on the fourth with one hop.

This also keeps your analytics and links clean, because every visit and link counts for one address.

Redirect loops and how to read them

Quick answer

A loop happens when two or more URLs send visitors to each other forever. Browsers show an error and the page never loads. The checker stops at 10 hops and shows you the repeating pattern.

Loops often come from conflicting rules, such as a plugin forcing www while the server removes it.

Remove one of the conflicting rules, clear your cache and test again.

Redirects and your Google Business Profile link

Quick answer

The website link on your Google Business Profile should go straight to a live page, not through a chain. Test it and use the final URL if it redirects.

Extra hops slow the visit and can break tracking parameters.

Also check the links in your citations and social profiles, which are often the oldest ones to go stale.

Sources: Google Search Central: Redirects and Google Search, Google Search Central: Googlebot

Frequently asked questions

It is a three-digit number a server sends back with every response. It tells the browser or Googlebot what happened: 200 means the page loaded, 301 means it moved permanently, 404 means it was not found, and 500 means the server failed.

Share this page

We audit your profile. Then we talk.

Book 30 minutes on video with the founder. We prepare your local SEO audit, go through it together, and you decide.

Free audit, reply within 24 hours. You sign nothing today.
  1. 01
    You book your call
    Pick a 30-minute slot in the founder’s calendar.
  2. 02
    We run your audit
    We review your profile, your local opportunities and your competitors before the call.
  3. 03
    We go over it on video
    We walk you through the results and talk it over openly, whether we work together or not.

ICHI, local SEO assistant

Ichiban SEO is the local SEO agency that specializes in Google Maps, founded by Nathanaël Butet. ICHI answers anything about the agency in a few seconds.

What we do

Local SEO only: getting your business into the Google Maps local pack for your city and your trade.

The guarantee

Google Business Profile optimized within 24h of getting your access, or your 2nd month is free.

Your competitor

One professional per city and per industry. Your direct competitor cannot hire us.

Pricing

Ascension: $497/month. Domination: $897/month. No setup fee.

The method

Optimized Google profile, consistent listings, customer reviews, local pages, proximity links, rank tracking.

The free audit

30 minutes on a video call with Nathanaël: we check whether your spot is open and size your potential.

Ask ICHI

Book my free audit

ICHI is an AI and can make mistakes. For advice on your case, book the free audit with the team.